Husqvarna LG 164 Operator's Manual page 21

b) LG 204:
2. Tilt the product to drain the oil.
Note: You can also use a manual oil drain pump to
drain the oil in the eccentric element.
3. Clean the surfaces around the hole for the oil drain
plug, the threads of the hole and the oil drain plug.
Use a dry cloth and, if it is necessary, an applicable
solvent.
CAUTION: Do not use water to clean
around and on the oil drain plug.
1114 - 002 - 03.04.2020
4. Fill the eccentric element with oil of the correct type.
Technical data on page 26 .
Refer to
5. Install the oil drain plug.
To do a check of the battery
1. Disconnect the battery cables (A).
A
B
C
2. Examine the battery for damages (B). Replace the
battery if it is damaged.
3. Clean the battery terminals (C).
4. Connect the battery cables.
To charge the battery
• If the battery is not used for a long period of time,
charge it fully before you use it.
• Use a battery charger that automatically adjusts the
voltage. We recommend a 2-stage charger with
constant voltage that automatically decreases to
trickle charging when the battery is fully charged.
Speak to your Husqvarna dealer for information
about the correct battery charger.
• Do a trickle charging 1-2 times during the winter
season when the product is in storage.
A
C
21