Husqvarna LG 164 Operator's Manual page 20

2. Remove the air filter (A).
3. Clean the air filter housing with a brush.
4. Examine the air filter for damage.
5. Tap the air filter against a hard surface or use a
vacuum cleaner to remove the particles.
CAUTION: Do not let the nozzle of the
vacuum cleaner touch the surface of the
paper filter element. Keep a small
distance. The sensitive surface of the
paper filter element becomes damaged if
objects touch it.
6. Install the air filter in the opposite sequence.
To do a check of the V-belt
WARNING: Do not operate the product
without the V-belt cover installed.
1. Stop the engine.
2. Remove the V-belt cover.
20
3. Examine the V-belt for damages and wear. Replace
the V-belt if it is necessary.
A
4. Do a check of the V-belt tension.
5. If the V-belt tension is not sufficient, do this
procedure:
a) Loosen the screw on the belt tensioner (A).
b) Push the belt tensioner rearward.
c) Tighten the screw on the belt tensioner.
6. Install the V-belt cover.
To replace the oil in the eccentric
element
1. Remove the oil drain plug for the eccentric element
and connect a hose.
a) LG 164:
A
1114 - 002 - 03.04.2020