Fantasea Hybrid Vacuum Safety System - Fantasea Line FG7X III VACUUM Instruction Manual

FANTASEA HYBRID VACUUM SAFETY SYSTEM

The Fantasea Hybrid Vacuum Safety System is an optional pre-dive vacuum test and leak detector safety
system. The system allows confirming the watertight seal of the housing prior to the dive using the vacuum
system and monitoring the housing seal during the dive using the moisture detector.
Follow the instructions below to safely charge and use the system.
Important Notice
Identification of System Parts
1. Instructions provided below refer to housings which the system is already
installed in. In case of installing a new vacuum system that was separately
purchased, please refer to the installation guide included with the vacuum
system.
2. Use of the Hybrid Vacuum Safety System must not replace any of the other
safety measures conducted in order to ensure a complete watertight seal of
the housing before and during the dive.
(Housing Front Door Interior)
FG7X III VACUUM Housing Instruction Manual 20191222
22
Main PC Board
Signal Board
LED Indicator
Moisture Sensor