System Settings - auna iTuner 320 BT Manual

EN
46

SYSTEM SETTINGS

Press the MENU button to display the menu, press the 
select System settings and then press the SELECT button to confirm.
Equalizer
This system supports a variety of equalizers and sound effects.
Press the EQ button to access the Equaliser menu
Alternatively:
During System settings mode, press the 
and then press the SELECT button to confirm.
1. The display will show : FLAT > CLASSIC > ROCK > POP > JAZZ
/
2. Press the   buttons to select and then press the SELECT button to
confirm.
Network
1. During System Settings mode, press the 
Network and press the SELECT button to confirm.
/
2. Press the   buttons to select from the following settings, and then
press the SELECT button to confirm.
Network wizard
PBC Wlan setup
View settings
Manual settings
NetRemote PIN Setup
Network profile
Keep network connected
3. Press the BACK button on the unit or on the remote control to cancel the
/
 buttons to select Equaliser
/
 , buttons to select
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual config – select wireless network
with DHCP enable/disable.
Select PBC on the unit and press the PBC
button on the modem device that you
wish to connect with. Press the ENTER
button to continue.
Display the setting on the unit.
Select wireless network with DHCP enable/
disable.
Allows you to define a PIN number to be
entered before being able to connect the
device remotely over a network.
View the connected network..
Allows you to define whether the device
remains connected to its network in Standby
mode and when not in Network radio mode.
/
 buttons to