Testing Thermostats - Verdant VX-TW Network Installation

testing thermostats

Following the thermostat configuration, test if the thermostat is controlling the
HVAc unit.
Press the "Power" button to save the thermostat configuration and
➤
start using the thermostat;
Press the "Power" button to turn the thermostat ON;
➤
➤ Press the "Down" button to change the temperature setpoint below
the current room temperature to confirm that the thermostat
initiates air conditioning.
Press the "Up" button to change the temperature setpoint above
➤
the current room temperature to confirm that the thermostat
initiates heating.
change the fan speed by touching the "Fan" button to test if the
➤
thermostat is controlling the fan speed.
Verdant VX-tW Network Installation
19