EPRA14~18DAV3+W1 + ETVH/X16S18+23DA6V+9W(G)
Daikin Altherma 3 H HT F
4P587502-1 – 2019.07
#
Code
[3.4]
N/A
WD curve type
The weather dependent curve can be defined using the 2-points method or the
Slope-Offset method.
Also see
"9.4.2 2-points
The curve type in the menu of the additional zone is read only. It corresponds to
the curve type that is in use for the main zone. Thus, changing the curve type for
the additional zone must be done in the menu of the main zone: [2.E] WD curve
type.
Also see
"9.5.3 Main
zone" [
#
Code
[2.E]
N/A
Heating WD curve
Set weather-dependent heating for the additional zone (if [3.4]=1 or 2):
Setpoint mode
▪
Fixed
▪
WD heating, fixed cooling
▪
Weather dependent
4
curve" [
131] and
"9.4.3 Slope-offset
4
140].
▪
2-points
▪
Slope-Offset
9
Configuration
|
Description
4
curve" [
132].
Description
Installer reference guide
151