Toro Z Master Professional 6000 Series Operator's Manual page 10

126-2055
1. Wheel-lug nut torque 129 N∙m (95 ft-lb) (4x)
2. Wheel-hub nut torque 319 N∙m (235 ft-lb)
3. Read and understand the Operator's manual before
performing any maintenance, check torque after first 100
hours then every 500 hours thereafter.
127-0326
1. Read the Operator's
Manual.
2. Height of cut
1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained. 6. Crushing/dismemberment hazard of bystanders—do not carry
3. Warning—engage the parking brake, shut off the engine, and
remove the ignition key; read the instructions before servicing
or performing maintenance.
4. Thrown object hazard—Shut off the engine and pick up
debris before operating the machine, keep bystanders a safe
distance away from the machine, keep deflector in place
decal126-2055
decal127-0326
3. Remove the key from
the ignition and read the
Operator's Manual before
performing maintenance
or servicing the machine.
1. Maximum drawbar pull 36
kg (80 lb)
1. Belt routing
114-4468
5. Loss of traction/control hazard, slopes—loss of traction/control
on a slope, disengage the blade-control switch (PTO),
proceed off the slope slowly.
passengers, look forward and down when operating the
machine, look behind and down when reversing.
7. Cutting/dismemberment hazard; hand or foot—stay away
from moving parts and keep all guards and shields in place.
10
131-4036
2. Read the Operator's
Manual.
136-5508
decal131-4036
decal136-5508
decal114-4468