Figure 107
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7.
Remove and retain the hardware on both sides
of the deck
(Figure
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
108).
g009038
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
8.
Raise the deck struts and secure them in the
up position.
9.
Slide the deck out to the right side of the
machine.
70
Figure 108
g009197