Toro Z Master Professional 6000 Series Operator's Manual page 43

Figure 54
Changing the Engine Oil
Service Interval: After the first 8 hours
Every 100 hours (more often in dirty or dusty
conditions).
Note:
Dispose of the used oil at a recycling center.
1. Start the engine and let it run for 5 minutes.
g008804
Note:
This warms the oil so it drains better.
2. Park the machine so that the rear is slightly
lower than the front to ensure that the oil drains
completely.
3. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
4. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position
g027659
43
EUTRAL
(Figure 55).
Figure 55
-
LOCK
g008804
g027734