Toro Z Master Professional 6000 Series Operator's Manual page 44

5. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
56).
Figure 56
6. Start the engine and drive to a flat area.
7. Check the oil level again.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours
(Figure
Note:
Change the engine-oil filter more frequently
when operating conditions are extremely dusty or
sandy.
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
g027660
Note:
the engine, and then an extra 3/4 turn is
completed.
3. Fill the crankcase with the proper type of new
oil; refer to
44
43).
(Figure
Figure 57
Ensure that the oil-filter gasket touches
Changing the Engine Oil (page
Changing
57).
g008804
g027477
43).