Avaya 5900 Series Installing Manual page 8

Preinstallation checklist
No. Task
September 2017
Description
Ensure that the rack is grounded to the
same grounding electrode used by the
power service in the area. The ground
path must be permanent and must not
exceed 1 Ohm of resistance from the
rack to the grounding electrode.
Depending on the switch model, see
Installing ERS 5900 switch in an
equipment rack
Installing ERS 59100GTS and ERS
59100GTS-PWR+ in an equipment
rack on page 37.
Installing Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
on page 35 or
8