Siemens SIMATIC NET SFP Series Operating Instructions Manual page 52

Approvals
The following types of protection are possible:
● nA
IECEx classification: Ex nA IIC Gc
Certificate no.: DEK 18.0050 U
The products meet the requirements of the following standards:
– IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type of
– IEC 60079-0 (Explosive atmospheres - Part 0: Equipment - General requirements)
● ec
IECEx classification: Ex ec IIC Gc
Certificate no.: DEK 18.00xxU
The products meet the requirements of the following standards:
– IEC 60079-7 (Explosive atmospheres - Part 7: Equipment protection through increased
– IEC 60079-0 (Explosive atmospheres - Part 0: Equipment - General requirements)
Note
The plug-in transceivers meet the T4 classification when they are installed in SIMATIC NET
devices that are listed in the IECEx certificate DEK 14.0025X for ambient temperatures up to
70 °C.
You will find the current versions of the standards in the currently valid IECEx certificates.
Note for devices with CLASS 1 LASER
Important note on products certified according to Type Examination Certificate DEKRA
18ATEX0078 U / DEKRA 18ATEX00xxU and IECEx Certificate of Conformity DEK 18.0050 U /
DEK 18.00xxU and containing Class 1 optical radiation sources.
Note
CLASS 1 LASER
The plug-in transceivers are approved as laser Class 1 according to IEC 60825-1.
Fiber optic cables that are connected to these optical radiation sources may therefore either
lead into or through hazardous areas that require equipment of the explosion protection level
(EPL) Gb, Gc, Db or Dc.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EU directive 2014/30/EU "Electromagnetic Compatibility" (EMC Directive).
52
protection "n")
safety "e")
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2019, A5E02630804-13