Notes On Installation Of Sfp / Sfp+ Transceivers - Siemens SIMATIC NET SFP Series Operating Instructions Manual

Assembling

4.2 Notes on installation of SFP / SFP+ transceivers

4.2 Notes on installation of SFP / SFP+ transceivers
General notes on media modules and pluggable transceivers
Install and remove media modules only when the power is off
Media modules may only be inserted in or removed from a SCALANCE device when the
power supply to the device has been turned off.
Use only approved media modules
Use only "MM900" media modules in the module slots of SCALANCE devices.
NOTICE
Only use plug-in transceivers in approved SCALANCE devices
Only use the SFP/SFP+ plug-in transceivers in SCALANCE devices that have ATEX/IECEx
approval.
If you use the SFP/SFP+ plug-in transceivers in other devices, Siemens cannot guarantee the
compatibility and risk-free use of these components.
18
WARNING
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2019, A5E02630804-13