Sfp992-1; Sfp992-1Ld/Sfp992-1Ld(C) - Siemens SIMATIC NET SFP Series Operating Instructions Manual

Technical data
7.1 SFP transceiver
Properties
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.6

SFP992-1+

Properties
Transmission mode
Transmission speed
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.7

SFP992-1LD/SFP992-1LD(C)

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
32
Sensitivity min.
Input power max.
1000Base-LX
1000 Mbps (Gigabit Ethernet)
Multimode fiber-optic cable
Class1-LASER "Eye safe"
1300 nm
At 50 µm fiber core diameter
)
At 62.5 µm fiber core diameter
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-LX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
10 km
)
Minimum
Maximum
-17 dBm
-3 dBm
2 km
1 km
-9 dBm
-1 dBm
-19 dBm
-1 dBm
-9.5 dBm
-3 dBm
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2019, A5E02630804-13