Components Of The Product - Siemens SIMATIC NET SFP Series Operating Instructions Manual

Media modules
Note
The SFP media modules MM992-2SFP may only be fitted with approved transceivers. The
media module can be fitted with up to two pluggable transceivers.
The SFP media modules MM992-4SFP may only be fitted with approved transceivers. The
media module can be fitted with up to four pluggable transceivers.
Type
MM992-2SFP
MM992-2SFP
(C)
MM992-4SFP
3.2

Components of the product

The following components are supplied with a transceiver:
● Transceiver
● Information sheet
Unpacking and checking
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to the
specification.
If you use damaged parts, this can lead to the following problems:
● Injury to persons
● Loss of the approvals
● Violation of the EMC regulations
● Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2019, A5E02630804-13
Properties
2 x 100 / 1000 Mbps, SFP media module 6GK5
2 x 100 / 1000 Mbps, SFP media module,
coated
4 x 100 / 1000 Mbps, SFP media module 6GK5
WARNING
Description of the device
3.2 Components of the product
Article number Labeling on the
device
9922AS
992-2AS00-8AA0
6GK5 9922AS
992-2AS00-8FA0
9924AS
992-4AS00-8AA0
15