Scp Transceiver; Scp992-1; Scp992-1Ld - Siemens SIMATIC NET SFP Series Operating Instructions Manual

7.4

SCP transceiver

SC connectors
The attachment to Industrial Ethernet uses SC connector
technology (Subscriber Connector).
7.4.1

SCP992-1

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.4.2

SCP992-1LD

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2019, A5E02630804-13
1000Base-SX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Multimode fiber-optic cable
Class1-LASER "Eye safe"
850 nm
At 50 µm fiber core diameter
)
At 62.5 µm fiber core diameter
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-LX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
10 km
)
Minimum
Maximum
Technical data
7.4 SCP transceiver
750 m
350 m
-9.5 dBm
-2.5 dBm
-17 dBm
-3 dBm
-9.5 dBm
-3 dBm
39