Siemens SIMATIC NET SFP Series Operating Instructions Manual page 54

Approvals
FDA and IEC marking
The following devices meet the FDA and IEC requirements listed below:
Pluggable transceiver
SFP
SFP+
SCP
STP
Figure 9-1
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Mechanical stability (in operation)
Pluggable transceiver
SFP
SFP+
SCP
STP
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
support.industry.siemens.com/cs/ww/en/view/84922825)
● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual
support.industry.siemens.com/cs/ww/en/view/27069465)
● "EMC Installation Guidelines" configuration manual
cs/ww/en/view/60612658)
54
FDA and IEC approvals
CAUTION
IEC 60068-2-6 vibration
5 – 9 Hz: 3.5 mm
9 – 150 Hz: 1 g
1 octave/min, 20 sweeps
CLASS 1 LASER PRODUCT
●
●
●
●
IEC 60068-2-27 shock
15 g, 11 ms duration
6 shocks per axis
●
●
●
●
(https://support.industry.siemens.com/
Operating Instructions, 10/2019, A5E02630804-13
●
●
●
●
(https://
(https://
Transceiver SFP/SFP+/SCP/STP