Table of Contents
Advertisement
Notes:
1. Follow the same precautions you would use without the wrist strap. The 2209 Disposable Wrist Strap
is for static control. It will not increase or decrease your risk of receiving electric shock when using or
working on electrical equipment.
2. Remove the liner from the copper foil at the end when you unroll the strap.
3. Attach the copper foil to an exposed, unpainted metal surface on the frame of the unit (electrical
ground).
Install disk units
__ 1. The disk units are located in the front of your system unit.
__ 2. Locate the disk drives and look at the label of the disk unit. It is very important to replace the
disk units in the same exact location where they were removed.
26
270, 800, 810 In Rack Installation Instructions V5R3
Advertisement
Table of Contents
