Table of Contents
Advertisement
3. Attach the copper foil to an exposed, unpainted metal surface on the frame of the unit (electrical
ground).
Install disk units
__ 1. The disk units are located in the front of your system unit.
__ 2. Locate the disk drives and look at the label of the disk unit. It is very important to replace the
disk units in the same exact location where they were removed.
__ 3. Squeeze and pull the handle out toward you and down before you install the disk unit. If the
handle is not all the way down, the disk unit will not slide into the unit.
View video.
Install a Model 825 in a rack
33
Advertisement
Table of Contents
