Table of Contents
Advertisement
__ 6. Label the disk unit and put it in a static protective bag.
__ 7. Repeat the above steps for each disk unit in your system.
__ 8. Continue with the instructions.
Remove tape, CD–ROM, or DVD devices
__ 1. Disconnect the signal (larger connector) and power (smaller connector) cables from the back of the
device. Access to these connectors is from the side of the system unit.
__ 2. Pull the two latches that secure the device to the system unit frame forward until they stop.
18
270, 800, 810 In Rack Installation Instructions V5R3
Advertisement
Table of Contents
