b. Lift the handle (A) to seat and secure the SAS conduit card to the midplane as shown in
Figure 73.
Figure 73. Installing the SAS conduit card into the midplane
5. Complete the following steps to replace the midplane and SAS conduit card into the system:
a. Align the midplane with the track and ensure that the slot (A) on the midplane attaches to the
post (B) in the system.
b. Secure the thumbscrews (C) and (D) on the SAS conduit card.
c. Secure the thumbscrews (E) on the sides of the midplane.
Related tasks for disk drives or solid-state drives
109