Cleaning; Faults - UNITED OFFICE UAV 190 B2 Operating Instructions Manual

Cleaning

► Always pull out the plug before cleaning the appliance. There is a risk of
electric shock!
► The cutters in the appliance are very sharp! Risk of injury!
CAUTION! MATERIAL DAMAGE!
● Remove any residue left in the cutting opening
suitable tool, e.g. a pair of tweezers. Ensure that the appliance is unplugged
before doing this!
● Clean the appliance with a moist cloth. For stubborn dirt, add a little mild
detergent to the cloth.

Faults

If the paper jams:
This means that you have attempted to feed too much paper into the appliance
(max. 6 sheets 80 g /m
● Move the switch
The appliance now goes into reverse and the material that is being shredded
is ejected.
● Pull the paper out of the appliance and then set the switch
● The appliance is now ready for use.
If the appliance suddenly stops working:
This means that the appliance is overheated and the automatic safety cut-out has
activated itself. The overheat LED
► Remove the power plug from the wall socket to avoid unintended restarting
of the appliance.
● Place the switch
● Allow the appliance to cool until it has cooled to room temperature.
● Put the mains plug back into the socket.
● Switch the appliance on by moving the switch
UAV 190 B2
DANGER – ELECTRIC SHOCK!
WARNING – RISK OF INJURY!
Do not spray any oil or other lubricants into the cutter opening
These can irreparably damage the appliance.
2
paper).
into the "REV" position if the paper causes a blockage.
WARNING – RISK OF INJURY!
in the "OFF" position.
or cutting blades with a
lights up red.
into the "AUTO" position.
GB │ IE │ NI │ CY
.
to "AUTO".
│
7 ■