I-View DM-2MIPC01 User Manual page 43

 Media Configuration: Click this button to setup the media parameters of IP camera and the detail
description as below: Streaming: Configuring Video streaming settings as below:
 Source Resolution: Select video main streaming resolution from the drop menu.
 Streaming ID: Streaming 1 means is the " Main Streaming " that for the recording purpose.
The streaming 2 means is the " Sub streaming" that is for the remote viewing from Internet
when bandwidth is not enough or split video display to reduce the system loading.
 Video Encode: The Video Encoding standard can be set to H.264 or MJPEG. You can set the
profile level to High Profile, Main Profile or Basic Profile for H.264 encode.
 Audio Encode: There are G7.11 u Law /a Low compression. G.711ulaw selectable.
 Resolution: Choice the video streaming resolution for display and recording.
 I-Frame interval: It is the least compressible but doesn't require other video frames to decode.
Less number of I-Frame intervals will get less size of video streaming, but the video quality
will be worse when image change rate is high.
 Frame rate: The frame rate is to describe the frequency at which the video stream is updated
and it is measured by frames per second (fps). A higher frame rate is advantageous when there
is movement in the video stream, as it maintains image quality throughout.
 VBR (Variable Bit Rate): VBR files vary the amount of output data per time segment. It
43