Table of Contents
Advertisement
server.
3. Go to Configuration > Application > Media Settings.
receive the system log in TXT file format which contains the Network Camera's public IP
address in your email or on the FTP server.
4. Select PPPoE and enter the user name and password provided by your ISP.
5. Click Save to enable the setting and then the Network Camera will reboot.
6. Disconnect the power to the Network Camera; remove it from the LAN environment.
Port Settings: If there is a router and you want to access the speed dome through Wide Area
Network (WAN), you need to forward the 3 ports for the IP Camera. Click this button to
modify the HTTP (Default is 80), RTSP (Default is 554) or Control Port number (Default is
60000), Http streaming port (Default is 8080) and SSH (Default is 72) and click Save to change
the setting.
Date & Time: Click this button to setup the time of IP camera. The detail process description
as below:
Time Zone setup: Configuring Time Synchronization Manually. When the IP Camera is taken
to another time zone, you can use the Time Zone function to adjust the time. The time will be
Select System log so that you will
35
Advertisement
Table of Contents
