Exit Button Connection; External Cctv Camera Connection; Doorbell Push Button Connection - golmar SOUL S5110/ART 7W Instruction Manual

SOUL S5110/ART 7W VIDEO INTERCOM KIT
INSTALLATION DIAGRAMS

Exit button connection

The exit button allows the remote activation of the lock release connected between the CV- and CV + terminals (by
default) or the relay output (see page 36). The delay time for activation is 3 seconds, it being possible to adjust it
between 0.5 and 10 seconds (see page 36).

External CCTV camera connection

It is possible to connect an analog CCTV camera to each of the door panels, and they can be viewed (see page 35)
from the monitor or the mobile application. The camera must have local power.

Doorbell push button connection

Connect the doorbell push button to the HZ inputs of the monitor you want to ring.
BUS BUS CV- CV+ AP+
C NA GND CCTV AP-
BUS BUS CV- CV+ AP+
C NA GND CCTV AP-
HZ HZ
34