Vent-Axia Lo-Carbon Quadra Series Installation And Wiring Instructions page 10

Off On
60
Boost Speed (l/s)
30
15
12
Normal/Trickle Speed (l/s)
9
6
Fig.7.
Timer adjustment.
Turn clockwise to increase overrun
timer.
Humidity Setpoint Adjustment.
Turn clockwise to raise set point.
Speed Selection Switches.
(Factory setting shown is boost
speed of 15 l/s and normal/trickle
speed of 6 l/s.)
Installation Type Selection Switches:
 Through the wall installation.
 1.5m Ø100mm ducting with one
90° bend and a wall grille.
(Factory setting)
 3m Ø100mm ducting with two
90° bends and a wall grille.