MULTIQUIP WT5C Operation Manual page 26

Water trailers (honda gx120ut2px2 gasoline engine) (qp2hlf centrifugal pump)
Hide thumbs Also See for WT5C:
Table of Contents

Advertisement

7. Once water appears to have all been drained, lower
front trailer tongue by lowering front jack stand to the
lowest position (Figure 25).
TRAILER
TONGUE
Figure 25. Lowering Trailer Tongue
8. Rotate the manifold control handle to the 9 o'clock
position (horizontal/left) and leave it there (Figure 26).
Figure 26. Manifold Control Handle Position
PAGE 26 — WT5C/WTE5C/WT5CSG WATER TRAILER • OPERATION MANUAL — REV. #4 (03/14/17)
FRONT JACK STAND
(LOWEST POSITION)
MANIFOLD
CONTROL HANDLE
WINTERIZING PROCEDURE
9. Once fluid has stopped draining, reinstall the drain
plug on pump end.
NOTICE
It is important to cycle the manifold control handle from
the 3 o'clock position then back to 9 o'clock position to
allow all water to drain from the entire manifold valve
assembly.
NEVER leave the manifold control handle in the 12
o'clock or 6 o'clock position.
ALWAYS leave the spray bar control handle in the 12
o'clock position.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WT5C and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Wte5cWt5csg

Table of Contents