Download
Share
Print this page
MULTIQUIP WTE5C Series Service Bulletin
  1. Manuals
  2. Brands
  3. MULTIQUIP Manuals
  4. Utility Vehicle
  5. WTE5C
  6. Service bulletin

MULTIQUIP WTE5C Series Service Bulletin

Water trailers
Hide thumbs Also See for WTE5C Series:

Advertisement

Quick Links

Download this manual
Service Bulletin
WTE5C/WTE5HP Series Water Trailers
Product Group:
Water Trailer Models:
WTE5C/WTE5HP
Bulletin Type
X
_____ Mandatory
_____ Information Only
_____ Recommended Change
Details
Problem:
a. A select number of water trailers were shipped with axle assemblies that do not meet with proper axle load
ratings (GAWR).
Solution:
a. Replace existing axles with proper rated axle assemblies.
Parts Information
Table 1. WTE5C/WTE5HP Axle Service Kit
Item
Part No.
No.
Assembly AxleTRLR70
1
29396-SK
Electric Service Kit
2
19761
3
2540
Wire Butt Conector
Axle, Hex Nut 9/16"-18
4
29249
Axle, Mount Screw 9/16"-
5
29248
Axle, Electric Brake
6
29396
Assy. 3,500 lb (1,587 kg)
7
1662
8
49498
Instruction Sheet
WTE5C/WTE5HP SERIES WATER TRAILERS — SERVICE BULLETIN WT20180925 — 09/25/18 — PAGE 1
Date Issued:
Description
QTY.
1
Splice Terminal
12
16
16
N-2
16
18 X 3"
2
Capacity
8
Cable-Tie
1
10/01/18
SERIAL NUMBER/VIN NUMBER
S/N correspond to the last 5-digits of VIN
Remarks
Includes
items 2-8
Figure 1. Electric Axle Service Kit (TRLR70)
Service Bulletin No.
WT20180925
50022, 50024
50026 - 50028
50077 - 50083
50105 - 50117
50305 - 50308
50401 - 50406
50479 - 50484
50534 - 50539
located on the trailer frame
1
2
3
5
6
4
7
8

Advertisement

loading
Need help?

Need help?

Do you have a question about the WTE5C Series and is the answer not in the manual?

Questions and answers

Related Manuals for MULTIQUIP WTE5C Series

Summary of Contents for MULTIQUIP WTE5C Series

  • Page 1 Service Bulletin WTE5C/WTE5HP Series Water Trailers Product Group: Date Issued: Service Bulletin No. Water Trailer Models: 10/01/18 WT20180925 WTE5C/WTE5HP SERIAL NUMBER/VIN NUMBER Bulletin Type 50022, 50024 50026 - 50028 _____ Mandatory 50077 - 50083 50105 - 50117 50305 - 50308 _____ Information Only 50401 - 50406 50479 - 50484...
  • Page 2 NOTES WTE5C/WTE5HP SERIES WATER TRAILERS — SERVICE BULLETIN WT20180925 — 10/01/18 — PAGE 2...
  • Page 3 NOTICE Affected axles (2,470 lbs.) must be returned to the vendor as follows: Ship to: Dexter MWR, 1845 South 300 West, Salt Lake City, UT 841115 Attention: B. Quigley Use account number: XPO Logistics 640849505 Affected axles must be shipped to vendor within 30 days.
  • Page 4 The following step-by-step procedures are provided to ground and tire. assist in the removal and replacement of the tandem electric axle assemblies used on the Multiquip Water WOOD BLOCK Trailer models: WTE5C and WTE5HP. Both axle F R A assemblies will be replaced.
  • Page 5 8. Open the splice terminals (P/N 19761) and remove 11. To stabilize the tandem axle (Figure 8) equalizers the wires coming from the axle brakes as shown in during the axle replacement process, place a 2” X 4” Figure 5. (or like item) as shown on the opposite axle that is being replaced.
  • Page 6 New Axle Installation 3. Use new axle mounting screws (P/N 29248) and hex axle nuts to secure new electric brake axle assembly. NOTICE 4. Fasteners should be only be hand-tightened at this New hardware has been provided and is required for time.
  • Page 7 6. Using a hammer, gently tap (prevents damage to Axle Wiring screw head) the screws so that they lay flush against CURB-SIDE the bracket (Figure 14A~D) There are two wires extending from the axle tube as shown in Figure 15, connect these wires as follows: NOTICE Wire colors may be different than those shown in Figure 15.

  • Page 8: Wheel Mounting

    WHEEL MOUNTING HARNESS WIRING NOTICE 1. Use splice terminals (P/N 19761) to attach one wire to the RED wire and connect the other wire to the NEVER use an pneumatic air gun to tighten wheel WHITE wire. lug nuts. 2. Use cable-ties to secure the wire bundles to the wire Over-tightening lug nuts will result in breaking the studs harness and axle tube as necessary.
  • Page 9 NOTICE Affected axles (2,470 lbs.) must be returned to the vendor as follows: Ship to: Dexter MWR, 1845 South 300 West, Salt Lake City, UT 841115 Attention: B. Quigley Use account number: XPO Logistics 640849505 Affected axles must be shipped to vendor within 30 days.

  • Page 10: Service Bulletin

    © COPYRIGHT 2018, MULTIQUIP INC. Multiquip Inc , the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.

This manual is also suitable for:

Wte5hp series