Lifting And Transporting The Machine; Storage; Storing The Machine - Siemens SIMOTICS FD 1MQ1 Operating And Installation Instructions

4.18.4

Lifting and transporting the machine

● If adapter flange and adapter plates are also supplied, then lift them and transport these
● When lifting the machine, refer to the information on the lifting plate or in the technical data:
● Use only the attachment points (eyebolts) that are attached to the stator frame or the
Note
Place the machine in a secure and raised position
In order to obtain easy and safe access to the underside of the machine, place it in a secure and
raised position.
Standing under suspended loads
If the lifting gear or load handling attachments were to fail, the machine could fall. This can
result in death, serious injury or material damage.
● Never remain under or in the immediate vicinity of the machine when it is raised.
4.19

Storage

4.19.1

Storing the machine

You must correctly store the machine if you do not install and use it after it has been delivered.
NOTICE
Bearing seizure damage if incorrectly stored
If storage conditions are inappropriate there is a risk of bearing seizure damage. Resulting
damage can include scoring (brinelling) and corrosion.
● Follow the storage guidelines.
SIMOTICS FD 1MQ1
Operating Instructions 01/2019
parts separately. The load suspension equipment for the motor is not rated for lifting the
motor with mounted adapter flange is or adapter plates
– Comply with the specified spreading angles.
– Do not exceed the maximum lifting acceleration and lifting speed specified on the lifting
plate. Lift the machine without jerking it.
Acceleration a ≤ 0.4 g (≈ 4 m/s
Velocity v ≤ 20 m/min
bearing shield.
DANGER
)
2
Preparations for use
4.19 Storage
39