Table of Contents
Advertisement
4.9.7
Lifting and transporting the machine
NOTICE
Transport damage if the rotor shipping brace is not used.
The motor can be damaged if it is jolted during transport.
This can result in material damage.
● Always transport the motor with the rotor shipping brace supplied. The rotor shipping brace
● When the motor has to be transported after the output element is pushed on, take other
①
②
Image 4-1
Table 4-1
Thread in the shaft extension
M20
M24
M30
SIMOTICS DC 1HS6
Operating Instructions 02/2016
must be securely attached during transportation. Do not remove the rotor shipping brace
until you are ready to push on the output element.
appropriate measures to fix the axial position of the rotor, see the following figure.
Sleeve
Coupling
Rotor shipping brace without coupling (1) and with coupling (2).
Tightening torques for the shaft screw on the rotor shipping brace
③
Fixture
④
Shaft screw
Tightening torque
50 Nm
100 Nm
180 Nm
Preparations for use
4.9 Transport and storage
Preload
12 kN
20 kN
32 kN
31
Advertisement
Table of Contents
