Siemens SIMOTICS FD 1MQ1 Operating And Installation Instructions page 25

Item
(13)
(14)
Relevant directives
The following directives are relevant for the SIMOTICS motor series.
European low-voltage directive
The SIMOTICS motor series complies with the requirements of the low-voltage directive
2014/35/EU.
Eurasian Conformity
The SIMOTICS motor series complies with the requirements of the Russia/Belarus/
Kazakhstan customs union (EAC).
Underwriters Laboratories
The SIMOTICS motor series generally complies with UL and cUL requirements as component
of motor applications - and is correspondingly listed. Specifically developed motors and
functions are the exceptions in this case. Carefully observe the content of the quotation, and
that there is a cUL-marking on the rating plate.
Quality management system
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
Certificates that can be downloaded
You can download certificates for the SIMOTICS motor series at the following link:
Certificates (https://support.industry.siemens.com/cs/ww/en/ps/13358/cert)
The following directives are not relevant
● European EMC directive: The products are not considered as devices in the sense of the
● European Machinery Directive: However, the use of the products in a typical machine
● China Compulsory Certification (CCC): The SIMOTICS motor series does not fall under the
Rotors
The rotor assembly is pressed onto the shaft together with the cage winding. The drive end of
the shaft usually has a cylindrical shaft end. Dependent on the design, a second shaft end may
be located at the non-drive end.
SIMOTICS FD 1MQ1
Operating Instructions 01/2019
Description
Rated voltage [V] and connections
Rated current [A]
directive.
application has been fully assessed for compliance with the main regulations in this directive
concerning health and safety.
area of application.
Item Description
(27) Direction of rotation
(28) Data matrix code (order number and serial
number)
Description
25