Securing The Rotor - Siemens SIMOTICS FD 1MQ1 Operating And Installation Instructions
Low-voltage motor
Hide thumbs
Also See for SIMOTICS FD 1MQ1:
Table of Contents
Advertisement
4.18.3
Securing the rotor
Depending on the version, the machine is fitted with a rotor shipping brace. This protects the
bearings against damage due to shock and vibration during transport or storage.
NOTICE
Vibration and shock during transport
Not using the rotor shipping brace can cause damage to the machine if it is jolted during
transport. Material damage can result.
● If the machine is fitted with a rotor shipping brace, this should always be used when
● Only remove it before pulling on the output element.
● For machines with a vertical type of construction:
SIMOTICS FD 1MQ1
Operating Instructions 01/2019
transporting the machine. The rotor shipping brace must be attached during the transport.
– Do not remove the rotor shipping brace until the machine is in a vertical position.
– If a machine has to be transported in a horizontal position, the rotor must be fixed in
position before the machine is turned onto its side. Vertical machines can be supplied
in the horizontal position from the manufacturing plant.
Preparations for use
4.18 Transport
37
Advertisement
Table of Contents
