Programming Via The Handheld Programmer - Siemens SITRANS L Series Compact Operating Instructions

Key
6.2.4

Programming via the handheld programmer

Note
● While the device is in PROGRAM mode the output remains fixed and does not respond to
changes in the device.
● The device automatically returns to Measurement mode after a period of inactivity in
PROGRAM mode (between 15 seconds and 2 minutes, depending on the menu level).
Parameter menus
Note
For the complete list of parameters with instructions, see the full operating instructions.
Parameters are identified by name and organized into function groups.
SITRANS LR250 with mA/HART
Compact Operating Instructions, 11/2019, A5E48453192-AA
Function
Updates echo confidence value
Updates distance measurement
Mode opens PROGRAM mode
RIGHT arrow opens PROGRAM mode
UP or DOWN arrow toggles between linear
units and percent
6.2 Programming SITRANS LR250
Result
New value is displayed in LCD secondary re‐
gion.
Opens the menu level last displayed in this
power cycle, unless power has been cycled
since exiting PROGRAM mode or more than
10 minutes have elapsed since PROGRAM
mode was used. Then top level menu will be
displayed.
Opens the top level menu.
LCD displays measured value in either linear
units or percent.
Commissioning
39