Weather Dependent Operation - Daikin EHBH04+08DA User Reference Manual

3 Use the left dial to select an entry and edit the entry
with the right dial. You can program up to 6 actions
each day.
Mon
0 12 24
6:00 20°C 22:00 18°C
8:30 18°C --:-- --
17:30 21°C
4 Confirm the changes.
To copy the schedule to the other weekdays:
1 Select Monday.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
2 Select Copy.
Edit
Copy
Result: "C" is displayed next to the copied day.
3 Select Tuesday.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
4 Select Paste.
Copy
Paste
Result:
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
5 Repeat this action for all other weekdays.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
To program the schedule for Saturday and copy it to Sunday:
1 Select Saturday.
2 Select Edit.
EHBH/X04+08DA + EHVH/X04+08S18+23DA
Daikin Altherma – Low temperature split
4P495250-1 – 2017.12
C
C
C
—
C
3 Use the left dial to select an entry and edit the entry
with the right dial.
Sat
0 12 24
8:00 21°C
23:00 18°C
--:-- --
4 Confirm the changes.
5 Select Saturday.
6 Select Copy.
7 Select Sunday.
8 Select Paste.
Result:
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
To rename the schedule:
INFORMATION
Not all schedules can be renamed.
1 Select the name of the current schedule.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
2 Select the Rename option.
Delete
Rename
3 Browse through the character list and confirm the
selected character.
4 Confirm the new name.
Usage example: You work in a 3-shift system
If you work in a 3-shift system, you can do the following:
1 Program 3 room temperature schedules in heating mode and
give them appropriate names. Example: EarlyShift, DayShift
and LateShift
2 Select the schedule that you currently want to use.
4.8

Weather dependent operation

In space heating/cooling control, the leaving water temperature
setpoint mode can be:
▪ Fixed
▪ WD heating, fixed cooling (in heating mode, the leaving water
temperature is determined automatically depending on the
outdoor temperature)
▪ Weather dependent (the leaving water temperature is determined
automatically depending on the outdoor temperature)
You can change the setpoint mode for the:
4 Operation
C
User reference guide
13