Cleaning; Maintenance Intervals; Maintenance Interval Table - FLORABEST FKS 2200 F3 Translation Of The Original Instructions

Allow the machine to cool
down before all maintenance
and cleaning works. Danger
of burn injuries!

Cleaning

• Clean the machine thoroughly after eve-
ry use. In this way, you extend the life of
the machine and avoid accidents.
• Keep the gripping handles free of petrol,
oil or grease. Clean the gripping han-
dles, where appropriate, with a moist
cloth soaked in soap. Use no solvents or
petrol for cleaning!
• Clean the saw chain after every use. Use
a paint brush or wipe for that. Do not use
any liquids to clean the chain. After clean-
ing, oil the chain lightly with chain oil.
• When cleaning, also remove the chain
wheel cover (
A
be cleaned as well.

Maintenance Interval Table

Machine part
Components of the chain brake Check, replace if required
Sprocket chain wheel (
Saw chain ( 5)
A
Saw chain ( 5)
A
Guide bar ( 4)
A
Guide bar ( 4)
A
Oil automatic system
15) so that this area can
Action
25) Check, replace if required
Check oil, regrind or re-
place if required
Clean and oil
Check, clean and oil
turn around
check and, where appropriate,
clean oil outflow duct
G B
• Clean the chain bar (Guide) (
• Clean the ventilation slots and the sur-
faces of the machine with a paint brush,
whisk or dry cloth. Do not use any liq-
uids for cleaning.
• Clean the oil passages of the chain bar
( 27), in order to guarantee a trouble-
free, automatic oiling of the saw chain
during operation.

Maintenance intervals

Regularly carry out the maintenance opera-
tions listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Before
every
IE NI
4).
A
After 10 After
hours of every
use operation use






C Y


2 1