Torque Settings; Notes - Whyte 27C Works Supplementary Service Manual

6.0: TORQUE SETTINGS

Whyte Adjustable Dropout System
M6 x 14mm Pivot Screw
M6 x 16mm Clamping Screws
Whyte Rear Derailleur Hanger
M4 x 8mm Countersunk Head Capscrew
Torque explained: If no suitable Torque Wrench is available a Torque of 5 lbf.ft can be obtained by ap-
plying a force of 5lb, with a Spring Balance, to the end of a spanner, 1 Foot in length.
IMPORTANT: For all other torque settings, refer to the specific manufacturers information
bundled with this manual, or alternatively, refer to the specific manufacturers website for
further information.

7.0: NOTES

2015 Edition 1
WHYTE Service Manual
Nm
13 (min) - 15 (max)
13 (min) - 15 (max)
Nm
2.3 (min) - 2.8 (max)
lbs.ft
9.5 (min) - 11 (max)
9.5 (min) - 11 (max)
lbs.ft
1.7 (min) – 2.1 (max)
Page 19