Lubrication; General Lubrication; Torque Settings - Whyte C-7 Ridgeway Supplementary Service Manual

WHYTE Service Manual
Designed for the following use:
The bicycles in the Whyte C-7, LC-7, R-7, RC-7 & RD-7 series' have all been designed,
tested and comply with ISO 4210-2 Safety Standard, for typical road or path cycling use.
They have not been designed or tested for mountain biking or for use in competition.
The bicycles in the Whyte CX series have all been designed, tested and comply with ISO
4210-2 Safety Standard, for typical road or path cycling use. Also for Cyclo-Cross compe-
tition (when fitted with appropriate off-road tyres). They have not been designed or tested
for mountain biking use.
The bicycles in the Whyte RD-7C series have all been designed, tested and comply with
ISO 4210-2 Safety Standard, for typical road cycling use. They have not been designed or
tested for off-road use or use in competition.

5.0: LUBRICATION

5.1: GENERAL LUBRICATION

For the correct lubrication regime and maintenance of all parts on a Whyte bicycle, please
refer to the specific component manufacturers detailed instructions bundled with this man-
ual or for further information visit the specific manufacturers website.

6.0: TORQUE SETTINGS

IMPORTANT: For all torque settings, refer to the specific manufacturers information bun-
dled with this manual, or alternatively, refer to the specific manufacturers website for fur-
ther information.
7.0: NOTES
2016 Edition 1 Page 13