Removal Of Swing Motors (Pattern 1) - Daikin FTKS20KVLT Service Manual

Removal of Swing Motors (Pattern 1)

8. Removal of Swing Motors (Pattern 1)
Procedure
Step
1. Remove the swing motor
for vertical blades.
1 Lift the indoor unit with
a wooden base.
Remove the screw
2
behind the drain hose,
and disconnect the
drain hose.
Remove the screw at
3
the rear, and remove
the screws on the right
and the left side of the
swing motors for
horizontal blades.
24
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Drain hose
Swing motor for
horizontal blades
(R10323)
(R10329)
(R13748)
Si041049
Points
Removal Procedure