Daikin FTKS20KVLT Service Manual page 14

Removal of Electrical Box
Step
5 Disconnect the
connector for the swing
motors [S41].
6 Release the harness for
the swing motors from
the hook.
Cut the clamp near the
7
indoor heat exchanger
thermistor.
Pull out the indoor heat
8
exchanger thermistor.
12
Procedure
[S41]
Indoor heat exchanger thermistor
(R7935)
(R7936)
Some models have no clamp
near the indoor heat
exchanger thermistor.
(R13104)
The position of the indoor
heat exchanger thermistor
varies by model.
Be careful not to lose the clip
of the thermistor.
Clip
(R7937)
Si041049
Points
(R11268)
Removal Procedure