Daikin 2MXS18GVJU Service Manual page 27

Si12-994
Step
6 Disconnect the 2
brazed points, first (e),
and then (f).
Remove the defrost
solenoid valve.
Removal Procedure
Procedure
(f)
(e)
Removal of Four Way Valve / Defrost Solenoid Valve
The defrost solenoid valve is
only for the U.S. models.
Note:
Do not use a metal saw for
cutting pipes by all means
because the sawdust comes
into the circuit.
When withdrawing the pipes,
be careful not to pinch them
firmly with pliers. The pipes
may get deformed.
Provide a protective sheet or
(R12395)
a steel plate so that the
brazing flame cannot
influence peripheries.
Points
25