Table of Contents
Advertisement
Quick Links
This user's guide describes the characteristics, operation, and use of the TPS65084x evaluation module
(EVM). The TPS65084x EVM is a fully assembled platform for evaluating the performance of the
TPS65084x power management device. This document should be used with the schematic diagrams, the
printed-circuit board (PCB) layout, and the bill of materials (BOM) supplied in conjunction with this
document.
...................................................................................................................
1
2
2.1
2.2
2.3
2.4
3
4
5
6
..........................................................................................................................
7
.......................................................................................................................
8
8.1
8.2
1
2
GUI Front Page
3
4
....................................................................................................................
1
.......................................................................................................................
2
3
Trademarks
All trademarks are the property of their respective owners.
SLVUAH0A - November 2015 - Revised July 2017
Submit Documentation Feedback
................................................................................................................
..............................................................................................................
......................................................................................................
........................................................................................................
..............................................................................................................
................................................................................................
.....................................................................................................
.........................................................................................................
..........................................................................................
...................................................................................
........................................................................................
.....................................................................................................
..............................................................................................................
....................................................................................................
............................................................................................................
............................................................................................................
Copyright © 2015-2017, Texas Instruments Incorporated
SLVUAH0A - November 2015 - Revised July 2017
TPS65084x Evaluation Module
Contents
List of Figures
List of Tables
User's Guide
TPS65084x Evaluation Module
2
2
2
2
3
3
3
3
4
4
5
5
5
6
5
6
6
6
3
4
4
1
Advertisement
Table of Contents
Related Manuals for Texas Instruments TPS65084x EVM
Summary of Contents for Texas Instruments TPS65084x EVM
-
Page 1: Table Of Contents
This user’s guide describes the characteristics, operation, and use of the TPS65084x evaluation module (EVM). The TPS65084x EVM is a fully assembled platform for evaluating the performance of the TPS65084x power management device. This document should be used with the schematic diagrams, the printed-circuit board (PCB) layout, and the bill of materials (BOM) supplied in conjunction with this document. -
Page 2: Introduction
A computer with an available USB port is required to make use of the EVM software. The EVM software runs on the computer and communicates with the EVM via a USB-A to micro-B cable. TPS65084x Evaluation Module SLVUAH0A – November 2015 – Revised July 2017 Submit Documentation Feedback Copyright © 2015–2017, Texas Instruments Incorporated... -
Page 3: Power Supply
VSYS sense– line connected to input cap of PMIC Test points are not designed to carry current. They are intended for measuring voltage. SLVUAH0A – November 2015 – Revised July 2017 TPS65084x Evaluation Module Submit Documentation Feedback Copyright © 2015–2017, Texas Instruments Incorporated... -
Page 4: Header Descriptions
GPO2 – DRAMPWROK status indicator GPO3 – COREPWROK status indicator GPO4 – VCCAPWROK status indicator Inverted IRQB status indicator (since IRQB is active low) TPS65084x Evaluation Module SLVUAH0A – November 2015 – Revised July 2017 Submit Documentation Feedback Copyright © 2015–2017, Texas Instruments Incorporated... -
Page 5: Setup
The typical sequence for the switches is CTL1 (PMICEN), CTL5 (SLP_S4B), CTL4 (SLP_S3B) with CTL3 (SLP_S0IXB) already enabled to move through the sequence. From there, the CTL3 (SLP_S0IXB) pin can be toggled to test Connected Standby. Figure 1 is an example setup for using the TPS65084x EVM: VSYS (5.4V t 21V) ±... -
Page 6: Using The Tps65084X Gui
Figure 4. GUI Register Map With this information, it is possible to begin evaluating the TPS65084x device. TPS65084x Evaluation Module SLVUAH0A – November 2015 – Revised July 2017 Submit Documentation Feedback Copyright © 2015–2017, Texas Instruments Incorporated... - Page 7 Changes from Original (November 2015) to A Revision ....................Page ................. • Fixed typo in URL for the installers in the Software section SLVUAH0A – November 2015 – Revised July 2017 Revision History Submit Documentation Feedback Copyright © 2015–2017, Texas Instruments Incorporated...
- Page 8 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 9 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 10 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
- Page 11 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2017, Texas Instruments Incorporated...
- Page 12 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
Need help?
Do you have a question about the TPS65084x EVM and is the answer not in the manual?
Questions and answers