TPS7B82EVM-024 Evaluation module Figure 1. TPS7B82EVM-024 Evaluation Module This user’s guide describes the operational use of the TPS7B82EVM-024 evaluation module (EVM) as a reference design for engineering demonstration and evaluation of the TPS7B8233QKVURQ1, low-dropout linear regulator (LDO). Included in this user’s guide are setup and operating instructions, layout guidelines, a printed circuit board (PCB) layout, a schematic diagram, and a bill of materials (BOM).
Introduction www.ti.com Introduction Texas Instruments' TPS7B82EVM-024 EVM helps design engineers evaluate the operation and performance of the TPS7B82-Q1 linear regulator for possible use in their own circuit application. This particular EVM configuration contains a single 300-mA, high-voltage, ultra-low-I , low-dropout regulator for automotive systems.
EVM Setup www.ti.com EVM Setup This section describes how to properly connect and setup the TPS7B82EVM-024, including the jumpers and connectors on the EVM board. Input/Output Connectors and Jumper Descriptions 2.1.1 J1: IN Input power-supply voltage connector. Twist together the positive input lead and ground return lead from the input power supply, and keep them as short as possible to minimize input inductance.
Page 9
STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
Page 10
www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
Page 11
www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
Page 12
www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
Need help?
Do you have a question about the TPS7B82EVM-024 and is the answer not in the manual?
Questions and answers