Fortinet FortiGate FortiGate-100A Install Manual page 55

Configuring the modem interface
FortiGate-60 series and FortiGate-100A FortiOS 3.0 MR4 Install Guide
01-30004-0266-20070831
Table 11: CLI commands for the FortiGate-60 and FortiWiFi-60 continued
If the modem at phone1 is Actiontec or
peer_modem1
AscendTNT, select that type, otherwise leave
{actiontec |
setting as generic. This setting applies to
ascendTNT |
models 50AM, 60M, and WiFi-60M only.
generic}
If the modem at phone2 is Actiontec or
peer_modem2
AscendTNT, select that type, otherwise leave
{actiontec |
setting as generic. This setting applies to
ascendTNT |
models 50AM, 60M, and WiFi-60M only.
generic}
If the modem at phone3 is Actiontec or
peer_modem2
AscendTNT, select that type, otherwise leave
{actiontec |
setting as generic. This setting applies to
ascendTNT |
models 50AM, 60M, and WiFi-60M only.
generic}
Enter the phone number required to connect
phone1
to the dialup account. Do not add spaces to
<phone-number>
the phone number. Make sure to include
standard special characters for pauses,
country codes, and other functions as
required by your modem to connect to your
dialup account
Enter the phone number required to connect
phone2
to the dialup account. Do not add spaces to
<phone-number>
the phone number. Make sure to include
standard special characters for pauses,
country codes, and other functions as
required by your modem to connect to your
dialup account.
Enter the phone number required to connect
phone3
to the dialup account. Do not add spaces to
<phone-number>
the phone number. Make sure to include
standard special characters for pauses,
country codes, and other functions as
required by your modem to connect to your
dialup account.
Set the maximum number of times (1-10) the
redial
FortiGate unit dials the ISP to restore an
<tries_interger>
active connection on the modem interface.
Select none to set the modem to redial
without a limit.
Enable or disable modem support.
status {disable |
enable}
Enter the user name used to access the
username1
specified dialup account
<name_str>
Enter the user name used to access the
username2
specified dialup account.
<name_str>
Enter the user name used to access the
username3
specified dialup account.
<name_str>
Configuring the modem for the FortiGate-60 and FortiWiFi-60
generic
generic
generic
No default.
No default.
No default.
No default.
disable
No default.
No default.
No default.
55