Toshiba e-Studio2000AC Hardware Troubleshooting Manual page 43

1.TROUBLESHOOTING FOR THE HARDWARE
3 Open the cover holding the handle of the Bridge Unit.
When the Hole Punch Unit is installed, proceed to step 5.
Remove the misfed paper.
4
Proceed to step 8.
When the Hole Punch Unit is installed
Open the Hole Punch Unit cover.
5
Turn the green knob to get the misfed paper out.
6
Be sure to turn the knob to the direction indicated by the arrow to remove the misfed paper. If you pull out the
paper forcibly without turning the knob, this may tear the paper.
Clearing a Paper Misfeed 43