Toshiba e-Studio2000AC Hardware Troubleshooting Manual page 44

1.TROUBLESHOOTING FOR THE HARDWARE
7 Close the Hole Punch Unit cover.
8 Close the Bridge Kit cover.
9 Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to close the tray until it clicks.
Be careful not to let your fingers be caught between the finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray can also be closed by pressing the right side of the lever.
44 Clearing a Paper Misfeed