Generator Run Connections - Bard MULTI-TEC W18AAPA Service Instructions Manual

Emergency Off, Emergency Ventilation and Generator Run Connections
The LC6000-200 controller is shipped with emergency off, emergency ventilation and generator run contacts. There
are factory-installed jumpers across terminals #6 and #7 (emergency off), #8 and #9 (emergency ventilation) and
#10 and #11 (generator run). Remove the factory-installed jumpers before making the connections.
LC6000-200 Series Connection for Emergency Off, Emergency Ventilation and Generator Run (If Applicable)
3
2 4 8 9
5 6 7
FIGURE 17
10 11 12 13 16
14 15
Generator Run*
Emergency Ventilation*
Emergency Off*
* Normally closed (NC) contacts required.
By default:
Closed = No Alarm
Open = Alarm
20 21 22 23
18 19
17
Manual 2100-676D
Page
24 25 26 27 28 29
27 of 45