Table of Contents
Advertisement
2 film holders are included in the package. They guarantee correct scanning results.
Information
Using 35mm Mounted Film Holder
Insert mounted film into slots with emulsion (non‐glossy) side down.
There are arrows and illustrations on the frame of each slot. Please follow the
illustrations to insert the mounted film.
Using 35mm Strip Film Holder
Open the film holder and place the filmstrip in the film holder with the emulsion (non‐
glossy) side down, then close the film holder cover. Always align the film towards the
direction of insertion. The direction of insertion is indicated by an arrow.
Film Holders
The scanner automatically detects the type of film holder you
have inserted and will automatically define the crop areas
according to the film holder.
These 2 film holders can be used for both positive and
negative source material, you just have to select the
responding button to scan.
11
Hide quick links:
Advertisement
Table of Contents
