Plustek OpticFilm 135i User Manual page 47

·
For Mac OS:
·
·
2. You will be greeted by the Scan screen. Select your desired scan mode by clicking
on one of the buttons on the left. Adjust the scan settings in the middle if necessary.
Insert your film tray and click on the Scan button when you are ready to scan.
3. A progress bar will be shown while the scan is being performed. After the scan is
completed, the View screen will be shown. Please skip to step 5.
4. The Crop screen will be shown if you selected the Custom scan mode or when
automatic framing and cropping failed. Adjust the crop area using click and drag,
and add or delete areas by clicking on the respective buttons. When you are done
adjusting the crop areas, click on the OK button. You will be taken to the View
screen.
5. Click on the Save button, your images are already saved and can be found in the
folder you set under Save path on the Scan screen.
You may select one or multiple images to delete, rotate or share at the same time.
Selected images will be highlighted with a gray rectangle around the images. Simply click
an image to remove a picture from your selection. Click on the Edit button above the
frames to switch to the Edit screen to apply various filter effects and make more detailed
adjustments to your images.
All rights are reserved.
Double-click the icon
Double-click the icon
model name.
Click the icon in the Dock.
Working with this program
on the desktop.
in Finder > Applications > Plustek > Your scanner
15