Led Indicator; Power Save - Plustek OpticFilm 135i User Manual

LED Indicator
The Power Saving button LED and Eject button LED indicate different scanner status.
Eject button Power Saving
LED button LED
Off
Blue
Blue Blinking Blue The film holder is being scanned.
Orange
Off
Off
Power Save
To save power consumption, the scanner light source always automatically turns itself
off after the scanning process is finished. The scanner will enter the sleep mode after it
is idle for a few minutes. Simply press any button on the scanner and the scanner will
return to the normal status. You can adjust the idle time to set when the scanner will
enter the sleep mode through the QuickScan Plus application.
The scanner is turned on and operating normally,
Blue
no film holder has been inserted.
The film holder has been inserted and the scanner
Blue
is ready to scan.
The film holder has been ejected and can be
Blue removed, or the film holder cannot be inserted
because there is no USB connection.
Orange The scanner is in sleep mode.
The scanner is off, either because the power is not
Off turned on, or because the AC adapter is not
properly plugged into an AC power outlet.
Status
7