Table of Contents
Advertisement
Several film holders are included in the package. They guarantee correct scanning
results.
Using Mounted Slide Holder
Insert mounted slides into slots with emulsion (non‐glossy) side down.
There are arrows and illustrations on the frame of each slot. Please follow the
illustrations to insert the mounted slides.
Using 35mm Filmstrip Holder
Open the film holder and place the filmstrip in the film holder with the emulsion (non‐
glossy) side down. Always align the film towards the direction of insertion. The
direction of insertion is indicated by a white square and an arrow. When scanning a
single filmstrip or filmstrips of different lengths, please use the included masking
sheets to cover any open frames, then close the film holder cover.
Arrow
Film Holders
Direction of insertion
16
Advertisement
Table of Contents
